Archive for December, 2010
Analysis for Cleanliness
Analysis for Cleanliness
You cannot control that which you do not measure.
In more and more industries, the exact knowledge of particle contamination is gaining in importance. Contamination of materials in dimensions of a few micrometers was mainly of concern for the pharmaceutical and semiconductor industries. However, not only manufacturers of circuit board components, but also traditional car parts suppliers face new demands on particle recognition and contamination source identification.
Cleanliness for the automotive parts manufacturers has become a huge topic in today’s ever challenging continuous improvement world. The need to define, measure and control the levels of particulate contamination on product is the new norm for suppliers and automotive OEM’s.
Cleanliness directly relates to product warranties, reliability, performance and safety issues. It has long been known that a dirty product gives us poor quality and low life expectancy. The dirtier the transmission from new, the less time it will last.
It is crucial now to identify particles and their source so that effective elimination can be achieved. Residual contamination consists of particles that persist on the component’s surface after the final step in manufacturing. Such contaminants are introduced via parts from suppliers or arise during processing. After vehicle assembly, the contaminant particles can cause severe damage, loss of function or reduce the lifetime of the product.
Cleanliness is defined as the contamination level of a component surface. Common measures to quantify the cleanliness are mass of the contaminants as well as number, size of the dirt particles. In general, the customer will specify contamination limits. The supplier then has to maintain these levels and document them regularly by means of contamination analysis.
The analysis of the contamination has to be proven to not affect the result and to be effective in evaluating all the contamination present. Methods of extraction and evaluation are specified in the international standard ISO 16232. Particular attention must be paid to the extraction method to ensure no contributing factors are introduced to the evaluation. There are different methods of counting the resulting extracted particles but by far the most accurate, repeatable and cost effective is automated microscope analysis. The microscope with software can scan the filter membrane; sort the particles by size class and even determine basic material composition (metal, non-metal, fiber). Once the data is gathered a custom report can be generated based on the customer requirements.
For more information on cleanliness analysis, visit http://www.onclean.com
Chris Trower is the President of Onclean Labs Inc, an Ontario based lab specializing in third party cleanliness analysis testing.
Plasma Gasification Plant Benefits
Plasma Gasification Plant Benefits
Plasma Gasification Plant (PGP) projects are being developed by at least five gas plasma technology companies, and there are real benefits to be obtained from this technology for the destruction of Municipal Solid Waste (MSW).
There is some debate still whether the process has been demonstrated to be a vaible technology which can be reliably operated by our waste management companies at reasonable cost and in compliance with all emissions regulations. However, the consensus seems to be largely in acceptance now that the technology is largely proven and inherently cleaner than incineration.
Although, gasification is used as a power generating technology, and gas plasma plants do provide a power feed-in to the local power grid, it should be realised by all that the purpose of selecting plasma gasification is currently that of achieving maximum waste mass destruction. The intent of the PGP is primarily to provide an efficent and clean method of dispoing of large quantities of residual MSW. Plasma gasification, although it does produce energy from waste is not primarliy an Energy from Waste (EfW) or Waste to Energy technology. There are other better proven, more efficient, and potentially always also cheaper ways to produce Energy from Waste, such as incineration.
PGPs suffer a high sacrificial load from the use of power at the electrodes to generate the plasma, and energy is also expended before the MSW reaches the plasma zone in the gasifier in chopping up and ensuring that the particle size of the waste is quite small. For this reason they do expend a large proportion of the power generated just in maintaining their own internal power demand.
However, as a waste destruction method producing an inert residue without creating at the same time high levels of toxic gaseous emissions the gas plasma process excels according to reports made to date. It has every reason to be cleaner as well because the reactions which take place in the plasma state take place so quickly and completely that the toxic organic chemicals produced in other combustion processes simply don’t get a change to be produced.
For a waste management process PGP therefore holds a very good prospect of adoption, as it is a process which is very efficient at diverting waste away from landfill, and thus scores highly among local authority waste disposal engineers who are constantly seeking to comply with regulations to reduce the amount of organic waste sent to landfill.
The PGP process however, also holds another merit and that is that it is being viewed more favourably by the public than incineration, and one main reason for that would be its clean emissions record when compared with incinerators historically.
Throughout Europe the requirement for BMW to be reduced by ever larger percentages necessitates the use of new technology to achieve this high rate of waste diversion, even after high recycling has also been achieved.
Look out for a plasma gasification plant appearing in a district near you soon, and look favourably upon it!
Steve has built a great web site where there are a lot more facts about gasification. This is a hot subject indeed for this technology which has become an essential read for all those who appreciate renewable energy issues and are interested in taking action to reduce the impact of climate change.Article Source: http://EzineArticles.com/?expert=Steve_D_Evans
A Carbon Footprint is Impacted by Fugitive Refrigerant Gas Emissions
A Carbon Footprint is Impacted by Fugitive Refrigerant Gas Emissions
The United States and a host of other foreign countries are focusing on fugitive emission tracking for certain industries. The goal is to identify the amount of substances that are emitted into the atmosphere when a refrigerant gas leak occurs. This will give government officials at the EPA a better understanding of the amount of greenhouse gases harming the environment each year and contributing to global warming due to the ineffective management of refrigerant gases.
Fugitive emission takes place when an unexpected leak of a hazardous substance occurs in a system and the discharge is not contained in a vent, stack, or duct. This may be caused by a component failure, poor servicing, or a breakdown in some industrial process. When a system containing refrigerant leaks, these high global warming potential substances cause damage to the atmosphere. Certain refrigerant gases are not broken down in the atmosphere and end up entering the stratosphere and destroying the protective ozone layer over time.
Across the U.S. economy, refrigerant gases or fugitive emissions equal over 300K tons of carbon dioxide each year. Other countries have similar or worse outputs. Many environmental regulations, such as The Montreal and Kyoto Protocols, exist to reduce the escape of harmful substances, like refrigerants, into the atmosphere over time. There are additional goals to reduce the potential for global warming in the near future and to improve air quality in the long term by reducing the emissions refrigerant gases.
A select few refrigerant gases have multiple detrimental effects on the environment. Not only are they ozone depleting substances but they are also chemicals with a high global warming potential (GWP) which places them into the category of greenhouse gases which lead to global climate change. For many reasons, it is important to effectively monitor, track, and report refrigerant gas usage.
The EPA has finalized its rules pertaining to any fugitive emission occurrence, whether through evaporation or a leak. The regulations apply to several industries, including existing and newly constructed facilities with systems using refrigerant gas in their workplace heating and cooling systems. Other industries are industrial chemical manufacturing, electric services, pulp and paper mills, and petroleum refinancing.
Tracking fugitive refrigerant gases is required by facilities owning or operating HVAC-R systems or by manufacturers who produce them. The EPA has identified a number of dangerous compounds, among them chloroflurocarbons, hydrofluorocarbons, methyl bromide, halons, methyl chloroform, and carbon tetrachloride.
A particular concern for fugitive emission problems is with refrigerant gas, because it contains chloroflurocarbons and hydrofluorocarbons, two primary contributors to the weakening of the ozone layer and the increase in greenhouse gas volumes. Furthermore, refrigerant gas is used across many industries in refrigeration and cooling units, ventilation and air conditioning systems, and fire protection systems.
When a fugitive emission occurs, businesses are required to track the refrigerant leak rates and report annul refrigerant usage it to the EPA. One of the primary emissions scopes, fugitive refrigerant gas emissions are an integral part of an organizations carbon management requirements. Of the utmost importance is the determination of the HVAC-R system that is leaking and the capturing of the service event detail related to fixing the leak. Systems containing refrigerant gases must be inspected by EPA certified technicians and all service events must be logged when refrigerants are handled.
The new fugitive emission regulations provide a more standardized approach to thresholds identified by the U.S. Clean Air Act at the direction of the EPA. These include continuous monitoring, tracking of leaks, and reporting of leak repair, and containment.
Web applications and specialized tools can increase an organization’s efficiencies related to HVAC-R system maintenance, improve accuracy of refrigerant inventories thus saving money, and turn manual processes into a centralized, automated work flow. Development firms who specialize in the area. They ensure compliance and reduce the likelihood of substantial fines.
Daniel Stouffer, Product Manager at Verisae, has more information about fugitive emissions management. Refrigerant Tracker makes it easy to monitor, manage, and report refrigerant gas usage across multiple locations. Learn more at: http://www.Refrigerant-Tracker.com
Editor Jeff Siegel discusses the latest in Howard Stern news, tax cuts, and solar stocks for 2011.
Solar Power Is Cheaper Than Nuclear for the First Time | Inhabitat …
Energy from new solar installations has, for the first time, become cheaper than energy from new nuclear plants, according to a new Duke University study.
Casio Introduces New Solar-powered Watch
Solar-powered watches aren’t new and Casio has been making such watches for some time. Now the company come added a new solar-powered watch to its G-Shock series and the actual solar panel is placed just behind the watch face….
Sony demonstrates 'Flower Power' solar windows
Building solar cells into windows is obviously a brilliant idea. We’ve covered similar solutions here on Gizmag before, most notably Kyosemi Corporation’s Sphelar cells, which used silicon droplets embedded in glass to absorb light from …
Green Solar Energy Theater Cinema | Latest Technology News
Updates about iphone, gadgets softwares, laptops, microsoft and latest technology news.
Reduce – The Holy Grail
Reduce – The Holy Grail
The hard truth is that we all need to reduce. Reduce the amount of money we spend. Reduce the amount of food we eat…and our waistlines. And reduce the amount of stuff we throw away. In fact new we look at the 3 R’s of reduce, reuse, recycle, they are actually in that order for a reason. It is a hierarchy for a reason and reduce is the Holy Grail. Put in its simplest terms reduce means that we use less of the earth’s resources and in any environmental scheme should be our first priority.
That said, it is also the hardest to accomplish. When I thought about all the things we do to be greener, the number of examples of reducing stumped me. I suppose the most obvious example of our efforts to reduce was the decision some months ago, not to purchase an automobile. My husband has the use of a company van, but even that is rarely used. The difficulty comes when we want to go anywhere as a family. The work van has only one bucket seat in the front that fits three people. Obviously this presents difficulties. Even on our Saturday shopping trips with my mother-in-law, I end up sitting in the back of van; a solution that is both dangerous and illegal for the children. About a year ago, when I was working full-time, we were seriously considering buying a vehicle. But in the end, we thought the expense was too much when you consider not just payments, but insurance, road tax, maintenance and gas. Instead, we signed up for StreetCar; a car rental scheme that you pay a monthly fee to join and an hourly or daily rate only when you need to use a car or van. Looking back, that was one of the best decisions we have made both for the environment and family finances.
The other obvious example I found of reduction was our decision a year ago to switch to bags for life. We now have a stack of them beneath our kitchen sink and faithfully use them for our Saturday shops. But I do admit to occasionally forgetting them when just running out to grab something quickly. When this happens though, we make certain to re-use (we’ll talk more about that tomorrow) any plastic bags we get for outings or for small bin liners. Did you know that in the UK alone 100,000 TONNES of plastic bags are thrown away each year; that is the equivalent of 70,000 cars? So if there is one thing, I can encourage you to do, it is purchase bags for life. My store sells the sturdy plastic ones for about forty pence, the jute ones are about a pound, and the pretty cloth ones are about three pounds with a portion of the proceeds going to charity. Or it is very simple to make your own if you sew.
Speaking of which, sewing and mending our clothes is another excellent way of reducing. My boys from my husband to my sons are always wearing holes in their jeans on the inside thighs. Before the economic downturn, I admit we were likely to just toss them out and purchase new ones. But since I have not been working, we have instead taken them to the drycleaners and had them patched. The cost of the repairs is less than the cost of purchasing new (although I am committed to mending them myself from now on…a further savings). And we have reduced in a very small way the demand for jeans.
Of course, as I sit at my desk in my bedroom I am witnessing another reduction…the daylight streaming in through the open curtains. One of the first things I do each morning is open the curtains and the blinds. By using natural light when and where possible, we are reducing the amount of electricity that we consume and that the power grids must generate. We are also of course saving money on our bills. My husband is a genius at this; going around and turning off and unplugging everything he can each night before bed. I admit though that being American this whole switch on the plug thing still gets me and I often forget to do that, but I am improving. Of course, another example was turning down our thermostat during the winter and wearing heavier layers of clothes instead. In fact, I can think of only a couple of days this winter when we turned our heat on before night fall at all.
These are just a few ideas of ways that our family is reducing. There are many other things that we and you can do to cut back on the things we consume and help save our earth’s precious resources. On Friday as I said, we will do a mini-inventory and I will commit to new ideas on how our family can better live the 3 R’s reduce, re-use, recycle. I will be especially focusing on reducing since this is the most important of the R’s.
Terri O’Neale is the mother of six; ranging in age from 3 to 22. She has been both a working and stay-at-home mother at various times in her life. She was also a single mother for almost five years, before re-marrying the love of her life at the age of forty. Obviously, she has a life-time of training in raising a family on a tight budget. In addition to these real life experiences, she possesses a bachelors degree in health education and a minored in environmental management in her masters programme.
Terri feels strongly that this is one of the most challenging times in history for the family, but she also believes that families with the will and resolve to address the pressing issues of saving money, becoming greener, leading healthier lifestyles and spending more time with one another can endure these challenging times and come out victorious in the end.
Through Frugal Family articles, blogs, videos and social networking, she helps modern families rediscover some lost art forms such as cooking, sewing, and gardening. The goal is not to go back in time or become fanatical, but to help all families find simple and effective ways that fit into their lifestyle to make moderate changes with huge impacts. For more information, check out her blog http://frugalfam.wordpress.com/.
Have You Got Earthday Business
Have You Got Earthday Business
The sun is shining across the hills of West Cork as I listen to the story of Earthday told by a team of evangelists with nothing but Earthday business on their minds. In 2008, visionary Simon Ford started a group to bring like-minded, positive people together in socially conscious activities. He called the group Social Traffic and right now that group has Earthday business on its mind.
The group’s first major campaign centers around Earth Day with an event named, Earthday Birthday a global birthday party for Mother Earth. Earthday 2009 and the celebrations that will go with it is all set to clamor its way across the social media landscape like some all embracing vine, covering the sometimes harsh elements of the online world with a softer, greener facade which many hope will last for more than a lifetime.
Earthday 2009 is a global celebration and a day to spread awareness of people’s destructive impact on the planet. But before you jump right in there and start changing the world on a massive scale here’s a few simple things you can do to make a difference right now, tomorrow and every single day after that.
Here’s my list of top five things to do to celebrate Earthday 2009 and reduce your impact on our planet;
1. Plant a tree or two. If you’re feeling energetic plant a whole field full.
A tree will absorb CO2 and other forms of pollution, provide a home to hundreds of creatures, help to create and retain soil and performs a whole host of other ecological functions. And, in case you needed a reminder, will leave a lasting legacy of your time on the planet.
2. Walk to work for a day, a week or a whole month. You’ll feel better and the earth will be a much healthier place to live too.
You might even want to think about joining a car sharing scheme and make it a permanent part of your work life balance to drive to work only one day a week and sleep the other four in the passenger seat while someone else does all the hard work!
3. Dry your dishes naturally. Turn off the dishwasher at the dryer stage of the cycle and leave your plates and cutlery to dry themselves for a change!
4. Turn off all your plug sockets before bed. Maybe spend the evening in the dark for one day a week and treat the kids to a few ghost stories before bedtime!
5. Don’t be a water importer.
Get rid of your supply of bottled water, keep a jug of fresh tap water in the fridge and reduce the damage we do to the environment by producing plastic bottles to hold gallons of mineral water that tastes no different to the clear, fresh water that is piped through your home.
So, if you’ve got business on your mind this Earthday, perhaps you should take a few minutes to look around you and realise how precious our planet is and how beautiful that small piece of turf is right outside your window.
If you want to know more about this subject and how you can make a difference take a look at this great squidoo lens all about Earth Day Birthday right now.
Neil Ashworth is a member of Simon Ford’s Social Traffic Team who are raising awareness of environmental issues using the power of social media marketing to support the Earth Day Birthday campaign.
Largest Solar Array Powering A Liquor Store In Colorado
Andy’s Liquor’s solar array installation is the largest photovoltaic energy production system installed for a liquor store in Colorado.
New Schertz medical office to be solar powered – San Antonio …
When Northeast OB/GYN Associates opens its new 10000- square-foot office in September, it will be the first facility in the Schertz-Cibolo-Universal City area to be built with building integrated photovoltaic, or BIPV, solar panels.
Solar PV expanded by Audi | BiofuelsWatch.com
Audi has made an announcement that it will increase the rooftop solar electricity generation at Ingolstadt near Danube River. The e-tron models will use the current produced at plant site in the near future said Audi and they will …
Solar Park South / Jaramillo-Azuero Arquitectos | ArchDaily
In their entry for the Solar Park South Competition, the Colombian design team, Jaramillo-Azuero Arquitectos proposed education as the means of.
Top Solar Sources in the US and North America | EarthScape
Ideally a location for the generation of solar power should have a relatively high level of solar insolation (ability to generate a significant amount of solar energy), a fairly large amount of economic activity to result from solar …
Buy (Green Tip) Used
Buy (Green Tip) Used
A lot goes into making new products; energy, fuel, non organic materials and more. If we buy more items used, we will use less of the things that contribute to hurting God’s planet. Plus, we are being good stewards by making the most of everything we buy and use!
Some things we can buy used:
* movies. what’s the difference, really. used is cheaper, the same and better for the planet.
* music. see above.
* clothes. thrift stores can save you tons of money as well.
* books. buy them used or go to the library.
* cars. how used is up to you.
* furniture and appliances. garage sales and eBay are great places to start.
* homes. old houses are cool anyway.
* household items. there are many items you can pick up at a local good will or garage sale that are just as nice as going to the store and buying new.
* electronics. just be careful and always try it our before you buy.
* bikes. have you ever seen the price tag for a new bike recently. yikes! buy used and ride the bike as often as you can instead of driving. Double green for your trouble! lol.
* video games and systems. places like game stop are great. you can buy used, beat the game and then trade it in for another used game. too cool, right?
* toys. obviously clean and good condition are key here. if you look you can find some goodies. i have found a lot of cute items that my kids love.
As you can see, there are many ways we can help contribute to being good stewards of God’s planet. Including, buying used and spending our money wisely!
Copyright © Green Christian Network, All Rights Reserved
About the Author: Cindy Taylor is a Christian stay at home Mom who love the Lord and cares about God’s planet. You can see her passion and writing at her website, Green Christian Network (http://greenchristiannetwork.com).
Green Tip – Moms Use Clothe Diapers
Green Tip – Moms Use Clothe Diapers
Sure, this is a little messier than the easier, disposable version. However, do you even realize the amount of disposable diapers that are filling landfills?? Cloth diapers are a choice that every mother should seriously consider. Let’s look at some facts that are quite alarming…
Disposable Diapers Sobering Facts:
* from birth to about 2-1/2 the average child will go through about 7,300 diapers
* the cost for that is about $2600
* 18 billion diapers enter landfills each year
* disposable diapers make up about 3.4 million tons of trash
* health risks such as fertility issues in males, eyes, nose and throat issues and even asthma-like symptoms have been connected to disposable diapers!
* long term negative affects on animal and water life.
* the chemicals that make disposable diapers white increase the risk of cancer
* affect development
* they use more water. yep. you may need to wash cloth diapers, however, way more water is used making disposable diapers!
* a study, conducted by Anderson Laboratories in 1999 and published in the Archives of Environmental Health, found that disposable diapers release chemicals called volatile organic compounds (VOCs), including toluene, ethylbenzene, xylene and dipentene. They have been shown to have toxic health effects, such as cancer and brain damage, when used over time or high exposure.
* they use 1.3 million tons of wood pulp. that’s about 1/4 million trees every year.
* they take up to 500 years to break down.
* more viruses than you want to know about…including polio, survive for two weeks or more after disposed of.
There are many many many more reasons to avoid disposable diapers. However, I think our readers are intelligent and the above information is enough to get you thinking! Research for yourself. You will be shocked!
Go for organic natural reusable cloth diapers. You will not only be helping the environment and saving money, you will also protect your sweet precious love bugs from harm!
Copyright © Green Christian Network, All Rights Reserved
About the Author: Cindy Taylor is a Christian stay at home Mom who love the Lord and cares about God’s planet. You can see her passion and writing at her website, Green Christian Network (http://greenchristiannetwork.com).